QuickLogic Corporation (QUIK) Q2 2018 Earnings Report, Transcript and Summary

Good day, ladies and gentlemen, and welcome to the QuickLogic Corporation Second Quarter 2018 Earnings Conference Call. At this time, all participants are in a listen-only mode. Later we'll conduct a question-and-answer session and instructions will be given at that time. [Operator Instructions] As a reminder, this call maybe recorded. It is now my pleasure to introduce Ms. Moriah Shilton with QuickLogic's Investor Relation firm, LHA. Please go ahead.

Thank you, Andrew. Welcome everyone, and thank you for joining us today for QuickLogic's Second Quarter Fiscal 2018 Results Conference Call. With us today are Brian Faith, President and Chief Executive Officer, and Dr. Sue Cheung, Chief Financial Officer. Before we begin, I will read a short safe harbor statement. Some of the comments QuickLogic makes today are forward-looking statements that involve risks and uncertainties, including but not limited to stated expectations relating to revenue from new and mature products, statements pertaining to QuickLogic's future stock performance, design activity and its ability to convert new design opportunities into production shipments; timing and market acceptance of its customers' products; schedule changes and projected production start dates that could impact the timing of shipments; the company’s future evaluation systems; broadening the company’s ecosystem partners, expected results and financial expectations for revenue, gross margin, operating expenses, profitability and cash. These statements should be considered in conjunction with the cautionary warnings that appear in QuickLogic's SEC filings. For additional information, please refer to the company's SEC filings posted on its website and the SEC’s website. Investors are cautioned that all forward-looking statements in this call involve risks and uncertainties and that future events may differ materially from those statements made. For more details of the risks, uncertainties and assumptions, please refer to those discussed under the heading “Risk Factors” in the annual report on Form 10-K for the fiscal year ended December 31, 2017, the company filed with the SEC on March 9, 2018. These forward-looking statements are made as of today, the day of the conference call, and management undertakes no obligation to revise or publicly release any revisions of the forward-looking statements in light of any new information or future events. Please note, QuickLogic uses its website, the company blog QuickLogicHotSpot, its corporate Twitter account, Facebook page, and LinkedIn page as channels of distribution of information about its products, its planned financial and other announcements, its attendance at upcoming investor and industry conferences, and other matters. Such information may be deemed material information, and QuickLogic may use these channels to comply with its disclosure obligations under Regulation FD. The conference call is open to all and is being webcast live. We will start today's call with the company's strategic update from QuickLogic’s CEO Brian Faith. Then CFO Sue Cheung will provide financial results and guidance. Brian will deliver closing remarks and open the call to questions. At this time, it is my pleasure to turn the call over to Brian Faith, President and CEO. Please go ahead, Brian.

Thank you, Moriah. And thank you all for joining our Q2 2018 conference call. We have made tremendous progress since our last conference call. Most notably, we won two significant EOS S3 designs with large OEMs that forecast 2019 production in low to mid-seven figures and executed our first embedded FPGA Master Technology Licensing agreement with a semiconductor company. We believe these, and other high-profile designs will enable us to grow 2019 total revenue significantly more than our 50% goal and deliver a breakeven quarter by the end of next year. While production commitments from major OEMs give us confidence that we are developing the momentum and critical mass to deliver our long-term growth and profitability objectives, there are four factors limiting our growth in 2018 The delay of the Amazon Alexa Voice Services or AVS specification for hearable, wearable and other battery powered devices, delays in finalizing embedded FPGA IP license agreements, the push of our first smartphone design win from a fall 2018 release to a spring 2019 release, and the continued delay in the release of the wearable design win we have with a tier one smartphone company. The good news is that all of these factors are rapidly moving in the right direction and with this we are gaining visibility into production schedules that we anticipate ramping during the coming quarters. While we are forecasting our growth will start in Q3 and continue for many quarters going forward, second half 2018 revenue will not be significant enough to deliver the 50% growth we have been modeling for this year. Based on reports from customers, we expect a total of eight to ten AVS compliant products using our EOS S3 SoC will move into production during the coming months with the first scheduled for late Q3. However, we don’t have enough information from the other customers yet to forecast the total impact of their designs on second half 2018 revenue. While a number of potential IP customers have shown serious interest in our ArcticPro embedded FPGA, our engagements were stalled in a Catch-22. To address this, we modified our go to market strategy last quarter, and we are already seeing positive results. The short story is semiconductor companies wanted to run test chip experiments with our embedded FPGA technology before committing a significant amount of money to acquire an IP license for a new SoC design. To accommodate this and move the engagements forward, we created a Master Technology License Agreement or MTLA that carries only a modest support and maintenance charge. This solved two problems. First, it enables semiconductor companies and OEMs to build test chips using our embedded FPGA IP for only a modest cash investment. This provides them an opportunity to evaluate and quantify the benefits of eFPGA ahead of making a commitment to a new SoC design. This also provides us with exposure to other SoC design groups within the company, which expands our opportunities for new engagements. Second, the MTLA defines the terms and conditions of follow-on IP licenses. This means the vast majority of the negotiations and legal work is accomplished within the MTLA and the follow-on license agreements for targeted SoCs amount to only a couple pages. This is critical in some cases since anSoC design group that wants to use eFPGA may otherwise decide it does not have the time to go through tedious corporate level approvals and license negotiations. In short, with a test chip in place, designs groups can define the ROI and move quickly without disrupting the design flow for a given SoC. In June we announced the signing of our first MTLA with C-SKY Microsystems. C-SKY, which is in the process of being acquired by Alibaba, is the only high volume embedded CPU provider in China with its own ISA and reports over 700 million embedded CPUs shipped. The company's ultra-low-cost CK800 series of embedded CPUs addresses a wide range of cost-sensitive applications where discrete FPGA’s have historic use cases, such as AI, IoT, digital audio/video, networking and wireless communications, security, industrial control and automotive. C-SKY plans to incorporate our ArcticPro embedded FPGA in a new highly flexible, ultra-low power common CPU platform that will be fabricated using the SMIC 40nm LL process. The platform is expected to be available in mid-2019. This morning we announced that ETH Zurich has selected our ArcticPro embedded FPGA for use in its Parallel Ultra Low Power PULP platform that targets GLOBALFOUNDRIES’ 22FDX fabrication process. ETH is a renowned technical university located in Zurich, Switzerland and a founding member of the RISC-V foundation. ETH chose QuickLogic’s technology for its ultra-low power operation and its ability to create new options for extremely power efficient hardware/software implementations. We are collaborating with ETH to integrate our embedded FPGA in its PULP RISC-V SoC that will enable users to offload certain functions from the processors to the eFPGA fabric. This will give OEMs the capability to evaluate the power savings and performance improvements that embedded FPGA hardware solutions deliver relative to software solutions running on processors. This is critical for many use cases where designs must maintain the flexibility needed to adapt to new algorithms yet still be optimized for performance and ultra-low power consumption. We already have revenue generating IP license opportunities tied to the PULP 22FDX test chip. We received the 22FDX test devices from GLOBALFOUNRIES last quarter and continue to expect the qualification process will be completed by the end of this summer. We have ongoing 22FDX engagements that are moving forward ahead of this qualification that are independent of the opportunities tied to the ETH PULP program. Our initiative to port to a more advanced process node at TSMC is moving forward and is driven in part by a specific customer engagement targeting this process. At the bottom line, we have made distinct progress in our embedded FPGA IP initiative since our May conference call. Our new go to market strategy has already resulted in a MTLA agreement with C-SKY and is being evaluated by other potential customers that we feel are very good prospects for IP license agreements in 2019. We believe C-SKY, the engagements associated with our ETH initiative and other ongoing engagements will lead to multiple IP license agreements. However, since the timing of finalizing these anticipated agreements is unclear, and in some cases, may involve the interim step of an MTLA, we are not currently forecasting material IP license revenue for second half 2018. Last quarter I mentioned that we were in the final stages of negotiating an MOU with a significant Japanese smartphone OEM. The MOU is now signed and covers multiple smartphone models extending to 2020. We were originally forecasting the first smartphone would be released this year. However, the customer's lead carrier has asked them to hold always on / always listening voice capability for the model it targets for release spring 2019. We are hopeful this release schedule will result in a prominent display at Mobile World Congress 2019. As I outlined in our last conference call, we have three active opportunities with a tier one smartphone OEM. The hardware and firmware designs for the first wearable product were locked in Q2 and list our EOS S3 as the device of record. The audit of our package and test subcontractor is ongoing as are software regression testing and quality and reliability testing. The customer’s efforts with third party companies that are developing apps will likely continue even after the product is released for production. While we do not have a production schedule for this design win yet, we are currently anticipating it will start during the first half of 2019. We believe this design has low seven figure potential in 2019. While the design cycle for this first product has been unusually long, the customer’s understanding of the industry leading power consumption delivered by our EOS S3 SoC led to the second engagement for a high-volume consumer wearable. We expected to know by now if the customer selected EOS S3 for this second wearable design, but that decision is still pending. Beyond that, all I can share is we are working closely with the customer’s design team and that the EOS S3 design approach consumes less power than the alternative design approach. We believe the customer will make a final decision on this design before the end of this quarter. The customer is targeting the new wearable to be production-ready by end of 2018, and that volume will ramp beginning in Q1 2019. If we are successful in winning this design, I believe this it has low to mid-seven figure value in 2019. The third opportunity with this customer for a hearable design remains an evaluation as the customer has prioritized other programs and has not completed testing the new beam forming and advanced noise reduction technology available with our EOS S3 SoC. Naver Labs released its first consumer product, the AKI smartwatch, last May. AKI is a highly sophisticated smartwatch that leverages our EOS S3 to optimize low power consumption while enabling always-on / always listening voice capabilities. AKI is being primarily marketed and sold through Korea Telecom or KT, which is South Korea’s largest wireless telecom company. We expect AKI will contribute to our second half growth, and a new hearable engagement with Naver Labs has the potential to build on this success in 2019. In past calls I’ve discussed a wearable design win with a European health company targeting the B2B market. Since our last call, the founder and CEO of the company was replaced. The new CEO has reset the company’s near-term priorities and with that, placed the B2B wearable on hold. As a result, we no longer anticipate the wearable going into production this year and with our limited visibility, we are not currently forecasting revenue in our 2019 model. Last quarter I mentioned that we added a second engagement with the European fitness company that we have discussed on previous calls. The good news is the new design fully leverages the resources of our EOS S3 SoC including its embedded FPGA. However, with this design in development, the customer decided to drop its original design that used minimal EOS S3 resources. As a result, we no longer anticipate production revenue from this customer in 2018. Given the traditional upgrade schedules this customer follows, we expect the new product using our EOS S3 to be released in early 2020. Our success in markets beyond smartphones, wearable and hearable devices continues to build and will be a primary driver for second half growth. Since our last conference call, BBK Educational Electronics has introduced two new tablets that use our EOS S3 SoC to enable always-on -- always listening and trigger word recognition. With 40,000 terminal sales outlets in 600 Chinese cities and 50 flagship stores, EEBBK is a very well recognized brand and a leading supplier of interactive educational products in China. Its new S3 Pro flagship and H20 entry level tablets uses our EOS S3 to deliver the benefits of always-on / always listening and enable children in China to begin learning as soon as they can talk. We are engaged with EEBBK on a new potentially high-volume design that is scheduled for release in 2019. We have recently won a very significant design with a major consumer electronics company that is scheduled to move into initial production in very early in 2019. The first of up to ten products using our EOS S3 SoC is scheduled for what I anticipate will be a high-profile launch at CES in January 2019. Due to our NDA with the company, I can only share a few bullets: The design uses our always-on / always listening voice technology and our embedded FPGA. The OEM has high brand-name recognition. The end product is a new high-volume consumer category for QuickLogic. And, we anticipate 2019 revenue in the low to mid-seven figure range. In addition to the momentum we have established with major OEM customers that are scheduled to ramp new EOS S3 designs in the coming quarters, we continue to benefit from working closely with our strategic ecosystem partners. Last quarter we announced that Murata selected our EOS S3 for its new voice enabled Wi-Fi solution that it introduced at the IoT/M2M show in Japan last May. Given the fact Murata is the worldwide leader in the Wi-Fi module market; this was a nice win for QuickLogic. Murata has since stated that OEMs in Japan have shown interest and that it is expanding its marketing efforts for the new module outside Japan. While I believe this effort will lead to OEM design wins, it is too early to make any revenue projections. Qualcomm has officially included our EOS S3 in its eXtension Program. The eXtension Program provides support for designers wanting to extend the capabilities of Qualcomm’s CSR8670 and CSR8675 Bluetooth audio solutions. Our inclusion in the eXtension program makes it easy and cost-efficient for designers to use EOS S3 to add ultra-low power always-on / always listening and voice recognition features. Before I turn the call over to Sue for her financial presentation, let’s take a moment for a brief update on QuickAI. If you are new to QuickLogic, I encourage you to review our May 9th conference call webcast and the special webcast presentation for QuickAI that we provided in conjunction with our partners a week earlier. These webcasts can be found under the Events tab on our Investor Relations webpage. Our QuickAI initiative is moving forward in line with our expectations. We demonstrated some early proof of concepts with our partner, SensiML at the Design Automation Conference and Sensors Expo in June. We have also initiated a very intriguing customer engagement where QuickAI has the potential to significantly improve ROI by lowering operating costs and increasing yield. We continue to target our first production revenue for QuickAI during the second half of 2019. I would now like to turn the call over to Sue for a discussion of the financials. Sue.

Thank you, Brian. Good Afternoon and thanks to everyone for joining us today. Please note we are reporting our non-GAAP results. You may refer to the press release we issued today for a detailed reconciliation of our GAAP to non-GAAP results and other financial statements. We have also posted an updated financial table on our IR web page that provides current and historical non-GAAP data. For the second quarter of 2018, total revenue was $3.1 million and within our guidance range. Our new product revenue was $1.6 million, and mature product revenue was $1.5 million. Due to our continued success in diversifying our customer base, we had four customers with greater than 10% of total revenue in the second quarter, while Samsung represented less than 10% in the quarter. Our Q2 2018 gross margin was 50.1% and within our forecasted range. Operating expenses for Q2 were $4.5 million and were within our forecasted range. R&D expenses were $2.2 million and SG&A expenses were $2.3 million. R&D expenses were lower than anticipated due to the timing of certain expenses associated with porting our embedded FPGA IP to a more advanced node at TSMC. The net total for other income, expense and taxes in Q2 2018 was a $38 thousand charge, which was below our forecasted due to foreign currency exchange fluctuations. This resulted in a net loss of $3.0 million, or $0.04 per share, which was within our forecasted range. In May we raised net proceeds of $13.9 million from our public offering, which enabled us to end the quarter with $22.8 million in cash. Net cash usage during the second quarter was $3.9 million. This was above the forecasted range due to a significant increase in working capital and non-recurring costs associated with the launch of QuickAI and other long-term strategic initiatives. Our revenue guidance for Q3 is approximately $3.5 million, plus or minus 10%. Total revenue is expected to be comprised of approximately $1.8 million of new product revenue and $1.7 million of mature product revenue. The increase in new product revenue is expected to be driven mostly by the growth in sensor processing. On a non-GAAP basis, we expect our gross margin to be approximately 50% plus or minus 3. We are currently forecasting non-GAAP operating expenses at approximately $4.7 million, plus or minus $300 thousand. We expect our non-GAAP R&D expenses to be approximately $2.4 million and non-GAAP SG&A expenses to be approximately $2.3 million. We expect our other income, expense and taxes will be a charge of approximately $60 thousand. At the midpoint of our forecast, our non-GAAP loss is expected to be approximately $3.0 million, or $0.03 per share. As was the case in prior quarters, the main difference between our GAAP to non-GAAP results is our stock-based compensation expense, which we expect to be approximately $500 thousand for the third quarter. In Q3, we expect to use between $2.5 and $3.0 million in cash. The anticipated sequential decrease in cash usage is mostly attributable to a large decrease in accounts receivable that will be partly offset by an increase in inventory. With that, let me now turn the call back over to Brian for his closing remarks.

Thank you, Sue. Before opening the call for Q&A, I want to take a moment to highlight what I think are some important points for our investors to take away from this conference call. First, let me start by saying I appreciate your patience. It’s been a longer road than I envisioned, but I believe we are VERY close to a positive tipping point. While the growth we are forecasting for Q3 is modest, it breaks a pattern of essentially flat revenue for the ten preceding quarters and is being driven by the ramp of our first significant OEM designs for EOS S3. In looking beyond Q3, I believe the major OEM designs we have already won will drive meaningful sequential growth for many quarters to come and that engagements with other large OEMs and embedded FPGA license revenue will layer on top that. In eFPGA, we adapted our go to market model to break out of an endless loop that was stalling our many engagements. We believe our MTLA strategy, which has already resulted in an agreement with what will be Alibaba’s first venture into the semiconductor market, will lead us to land multiple IP license agreements in 2019. With our EOS S3 SoC we have successfully transitioned from winning designs with small companies and ODMs to winning designs with major OEMs that have brand name recognition, the scope to use our solutions in multiple designs and the scale to drive volume. Last quarter we announced OEM product launches with Naver Labs and EEBBK. While these are not well-recognized names in the U.S., they are significant OEMs in their home countries. We expect these designs will contribute to our revenue growth in the second half of 2018 and beyond. During the last quarter, we signed an MOU with a major Japanese smartphone company for multiple models extending to 2020. We also won a very significant design that leverages our core eFPGA differentiation with a new OEM that I think will be one of the prominent products displayed at the upcoming CES in January 2019. We are also getting more clarity from the Tier One smartphone company about the release of its new wearable design and we are hopeful we will win a second design with the OEM this quarter. At the bottom line, large OEMs are scheduled to move new products using our EOS S3 into production starting in early 2019. These designs have low to mid-seven figure potential with defined production schedules and mark just a few of the high-volume designs that I believe will enable us to grow 2019 total revenue significantly more than our 50% goal. Operator, I would now like to turn the call over for questions.

Thank you. [Operator Instructions] And our first question comes from the line of Richard Shannon with Craig-Hallum. Your line is now open.

Brian, you gave us a lot of detail to go into, so I'm going to try to hit at few of the key ones here. In your prepared remarks the most interesting comment was for me that I saw was that major design -- you're one of the major CE companies expected to be first product that was to be announced at CES, and so the first of up to 10 products. I guess first question on that is -- can you characterize this opportunity or something that’s already been settled as kind of a platform win with you across a range of products, or even company-wide? Can you maybe characterize the relationship in the extent a bit there?

Yes, we have it, Richard, to the extent that I can with our NDA in place. So I would definitely categorize it as a platform type win. We anticipate the same design being used across these up to 10 products. It’s definitely a new category for QuickLogic, and I think it will have a very prominent display at CES. What we’re doing here is we’re doing voice recognition. And there are certain things that we’re doing in the FPGA that will be clear, once we can actually talk about this design publicly where it clearly shows there’s value to both of these technologies being in the same ship. And that’s really how we won this design against other ways that we could do this architecture with competitive devices. So, yes, it’s actually really exciting win for us, and it's a new thing that we haven't even talked about on previous calls. This moved really fast.

We'll all look forward to hearing more about that one. Maybe a question on embedded FPGA, and you talked a little bit about your new go-to-market strategy with C-Sky an example, that approach here. Any other initial signs of success about moving engagements along faster, I know, everything -- it sounds like you’re kind of in process, so maybe not complete signs. But we can help us understand how engagements have changed, and you’ve mentioned not expecting much to happen in the second half of the year. How fast could those things come and how broad is the pipeline looking for these new type of license agreements?

So the funnel that we were talking or referring to in Q2 is largely the same funnel in terms of direct semiconductor opportunities today. And I can say that, I mean, C-Sky jumped all over this change in go-to-market strategy very quickly. And there are the few other ones that are already in the funnel, that have been in the funnel that could actually find this year for an NPLAs have agreement to move into that test chip phase, resulting in more material revenue in 2019, once they actually do a test chip. But it's definitely loosened up some of the friction that we had been seeing with some of these customers to commit that six figure value to us just to do a test chip. But any of these factors again, if you're a company that's not familiar with programmable logic, it's a really cool concept that you can program something to something in the future, but a lot of people will have difficulty wrapping their heads around that. It seems ambiguous. So lowering this financial bar to trial the technology, I think is good because they can start to see some of the used cases in real life and then go forward with that financial commitment. The other thing I'll mention with respect to the funnel is, we are always looking for leverage points. And I see that C-Sky and ETH, it's the announcement we did today, fall into that category, for me is leverage point. So those would be test chips and other people will take those test chips as starting points for what could be either around SoCs. So it's a way for us to fan-out support of one or two or three companies and to multiple companies that use on the staring points. I think you see, probably ETH does a lot of these types of SoCs where they clearly see that eFPGA to the use as a hardware accelerator and not just as a scratch pad of logic. And that's where we see our value coming from. So we're really excited to see those -- both of those companies, actually have test chips that come out that we can then fan -out into multiple end customers. And by the way just to be clear, when that happens on that fan-out effect and people do move forward the production license in those cases. That does generate license revenue for us.

Maybe two questions from me also Brian, I think it's came really in the prepared remarks, you talked about the kind of delayed impact to delays of some of your initial Bluetooth and Hearable designs because of the Amazon AVS certification. Can you help us understand whether those bottlenecks have been relieved yet at Amazon or are they still left to go? And how much of the delayed you think this is relative to your expectations you communicated on the last quarter's call?

Yes, there has -- we have to be careful when I say, because we have NDAs with Amazon. So I don’t know that anything has been publicly put out as far as spec goes, but I can say that what we're hearing from customers that we're working with directly to have our solution already embedded into their hardware that they are looking to start qualifications of their product between now and the end of the year, which is why we came up with our revenue timeframe for this being that really is starting at the end of this third quarter, initially with people that are already are further down the pipe, all the way to subsequent months going into Q4 from a revenue timeframe. So if we go back to the last call where we talked about this, we thought that this spec actually would be already up by now and people would basically be done with certification by now, and that's not the case. But the fact that I'm giving these timelines now, this is coming from customers that are working with them. So I think there is a little bit more certainty around that now. [Indiscernible] [Multiple Speakers] because of the NDA with Amazon that we have.

You talked about confidence in reaching that breakeven level on a quarterly basis sometime next year. I think, can you just remind us what that breakeven level is and whether it's change at all?

Hi, Richard. This is Sue. We have not exchanged our breakeven level, still going to be $8 million to $10 million of revenue per quarter with 50% or higher gross margin in that quarter to get that to breakeven point.

Thank you. And our next question comes from the line of Suji Desilva with Roth Capital. Your line is now open.

So just a couple of -- just a question on next quarter’s guidance of $1.8 million. What’s driving the increase in new revenues, specifically amongst your wins and product opportunities?

Suji, this is an opening driven by the growth in their sensors business.

Any more specifics, Sue, you can give there in terms of which wins are driving it near term?

Both from the prepared remarks we talked about neighborhood and EEBBK contributing to that. Those would be the largest contributors by name followed by when these hearables actually start coming out of the first of which would be in Q3.

In Q3.

And then the defense smartphone opportunity that was put off maybe, can you give any color why the carrier adds to the smartphone vendor to hold off on -- always on voice feature near-term are there any specific driver network -- the bandwidth concerns or things like that? Just curious if there was technical issues there if any?

No, I am not those meetings, what I’ve heard is that they basically want to have the spring model, the sort of the springboard for the new features that they would carry through to next year and the fall would kind of follow as an evolution to the spring feature. So meaning that the new -- the new big features come out in the spring model. And so that's why this is a significantly different feature for them and they wanted to uncork that in spring. There is no network issue or -- network bandwidth issue that’s driving that.

And then lastly these -- the licensing side the business that the test chip phenomena here. What’s the length of time it takes for a test chip to be spun up? What’s the cycle time on that just to understand? When these customers do build that route, how long that take?

So a test chip from the manufacturing point of view -- from the moment you take that out and get into the shuttle till you get silicon back is generally about a quarter or to be a little bit longer depending on queue time with the subcons, then it’s a matter of how much time does it take you to verify the test chip, which could be a couple of months, like in the case of our test chip presented about three months, and then, the last part of that equation, the time that take you to do the actual design. So this is actually a key and value brought this -- this is a key reason why I think it’s good that we’re getting into these test chips because what these companies can do is basically start from an SoC that they’ve already done and have available and bolt on that eFPGA could that. So it actually compresses the amount of time to get from that to take out of the test chip. They don't have to really do this whole 12 to 16-month SoC design process to do it normally associated with the natural production SoC. So it’s actually a sort of a side benefit of doing this test chip approach. And in total, you can see that's why we’re saying that in -- like the first quarter of 2019 is where we can start to see other customers that are the fan-out effect from C-Sky and from ETH directly.

I just want to add a little bit, Suji. So from what I see from the contract agreement that signed with those customers, the terms are ranging from six months to 18 months. So that’s why we use for amortize those support and maintenance fee as well from differed revenue to revenue minimum. So you want to see our balance sheet that's what it is.

So those revenues won't be recognized upfront. They will be recognized manually over the service case. Is that right?

Yes. Yes.

And our next question comes from the line of Gary Mobley with Benchmark. Your line is now open.

A couple of follow-up questions relating to FPGA line of questions that Suji asked. So just to be clear that there have been about two master technology license agreements signed both of which have been announced C-Sky and ETH there, correct?

Correct.

Correct.

And the non-recurring engineering fees that you will eventually be able to recognize which you are on the balance sheet now as deferred revenue. That milestone will be the test chip coming back and meeting pre-specified working requirements, right?

Correct.

Okay. And so the dollar amount of these NREs is roughly how much per customer engagement? You said $1 million plus?

So they are going to range from several hundred thousand dollars to million dollars depending on how they are intending to use it and depending on the process notes. But to be -- I just wanted to make sure we are clear on those. C-Sky and ETH -- for the test chips, they are not going to have a full license fee. That's what this whole NPLA strategy is about is lowering that friction level to get into the test chip, so they can recognize the return that they can get from this. Once they do a production takeout that will trigger that several hundred thousand to million dollar license fee that you are referring to Gary. For C-Sky, or is their end customers that want to embed their IP. On the ETH side, they're a university. So they are not going to do a license fee to QuickLogic for production test chip. We're doing this test chip with them collaboratively to people that use their test chip as the starting point from that PULP platform and there could be numerous. Each of those companies that use that as the starting point, that use our eFPGA will acted how -- will have to pay us a full license fee, again on the order of several hundred thousand dollars to million dollars and that's the license fee. And then once those companies shift production units, they will carry that royalty. So something that you're talking about here now on the differed line is the support and maintenance contract, which is a very low percentage of the total license that we are talking about.

And so how many NPLAs -- how would you characterize or quantify the number of opportunities in your NPLA pipeline looking out even just as near-term is the balance of the year?

So I would say I'm tracking double-digit on a weekly basis so that our -- with our sales team as far as how many we could execute before the end of the year. I would say it's probably five or less that we could execute before the end of the year just based on where they are with their resource planning and where we are with our process note availability just in that ballpark.

And our next question comes from the line of Rick Neaton with Rivershore Investment Research. Your line is now open.

I’d like to take a look at some items on your balance sheet first. I'm looking at a $700,000 increase in inventory and a forecast in the third quarter for another inventory increase. Is that related to your early 2019 opportunities that include the Tier1 and the other unnamed OEM?

Rick, you’re correct. That’s the inventory that's build up for Q1 2019 shipment.

Did you give a -- did you put a number on your inventory increase forecast for third quarter yet? I didn't hear one. Did you give a number?

No. Usually we do not provide specific awards and caps are including inventory guidance.

I also noticed a $2 million increase in accounts receivable since the end of the year. Did you get the QFP packaging revenue in the second quarter or are you projecting that to be in the third quarter as well?

So bad devices was shipped in Q2, which is earlier than we forecasted. That’s why you see Q2 new product revenue increased, and it's higher than what we guided, yes.

So your -- and your big increase in working capital than you're putting in to building inventory for your first quarter '19 shipment opportunities, if I hear you correctly?

Correct.

I'm looking at some -- Brian, looking at some of the quantifications of low to mid-seven figure revenue opportunities you put on some of these design wins in 2019. And I'm -- if I go back to the end of 2017, and I look at your original CAGR target, your growth target is greater than 50% over the first two years. And I just do some basic cocktail math here. Am I out of line thinking that you could have 2019 revenue in the $27 million area, plus or minus a couple of million, which would basically be hitting your original CAGR target. Is that that really out of line?

Well, let’s see. If we look at this year, firstly, as a starting point for that -- if I would have modeled the rest of the share of course, of course, we gave the guidance of 3.5 for this quarter, and we talked about sequential growth, so Q4 is implied up there for the year, at this year, in fact as a starting point, it’s not a guidance number, but if you went around 10% growth for the whole year as opposed to the 50% that we’re talking about, and now you're talking about end of next year being 27, that would imply pretty good clip of growth between this year and next year. I mean it’s not out of the question, because if you look at these OEMs that we’re talking about with this million to low multimillion dollar value per design, and you add that on to our base business. I mean that math would say that it should definitely be going over 50%. So over 50% to that 27, yes, it's probably possible. I'm not going to go on to that guidance. But I think the difference, if you go below the surface areas, we do have large OEMs that we've closed designs with now, and especially this new -- and we just talked about on the call for the first time, this consumer electronics calibrated new for us. I mean that has fairly significant potential for us compared with the past. So, yes, I guess, cocktail math opinion is not out of the question.

I mean, when you said low to mid-seven figures of revenue for the new OEM consumer variable, you were talking about the one platform that was going to be introduced at CES. Is that right?

Yes.

And you said there are nine other opportunities in -- within this platform that that OEM intends to use the EOS S3 part FPGA in?

Yes, that's correct.

And are -- any of those other nine targeted for 2019?

Absolutely. But I don’t know the exact number of it, absolutely there.

And so, each of these opportunities could be low to mid-seven figures. Is that what you're telling us?

I don’t know how many of those 10 would be at that level. I think by the next call we'll probably have a little bit more clarity on the part that I can communicate to everybody. But I'm sure that some of those 10 do have that same value potential.

But the one being introduced in January at CBS does have low to mid-seven figure revenue opportunity.

Yes. They absolutely do and the follow-on of those other 10, I'm sure some of them do. How many of them do? I don't know yet. But I'll commit that by the next call we will have more clarity on that. So if you add all that up and these other OEMs I talked about, hopefully you can see why we're feeling really good about next rate hitting that 50% growth.

Well, that's why if I took the -- Brian, if I took your $12.1 million from our $12 million from 2017 and increased it by 50.1% each year that would get you to $27 million about in 2019. And so I'm just trying to ascertain if that was my model to begin with on a conservative basis if that's still within reason to be reached in 2019, given all of these new opportunities that you're disclosing now. That's all I wanted.

Absolutely. Yes, definitely.

Thank you. And that concludes our question-and-answer portion for today. So with that, I'd like to turn the call back over to CEO, Mr. Brian Faith for closing remarks.

Thank you, operator. We will be participating at the following investor and industry events; Jefferies' Annual Semiconductor Hardware Summit in Chicago on August 28th, ROTH's Internet of Things Corporate Access Day in San Francisco on September 5th, The SMIC Technology Symposium in Shanghai on September 12th. I will be presenting a keynote at Silicon Summit-East in Saratoga Springs, New York on October 9th, ARM TechCon in Santa Clara on October 16th through 18th and multiple GLOBALFOUNDRIES Technology Conferences in multiple locations worldwide in the third quarter. Our next conference call is scheduled for Wednesday, November 7, at 2:30 PM Pacific Time. Thank you for your continued support and good bye.

Ladies and gentlemen, thank you for participating in today’s conference. This does conclude the program. And you may all disconnect. Everyone have a wonderful day.