Good afternoon, ladies and gentlemen and welcome to the Worthington Industries' First Quarter Fiscal 2017 Earnings Conference Call. All participants will be able to listen-only until the question-and-answer session of the call. This conference is being recorded at the request of Worthington Industries. If anyone objects, you may disconnect at this time. I would like to introduce Ms. Cathy Lyttle, Vice President of Corporate Communications and Investor Relations. Ms. Lyttle, you may begin.

Good afternoon and welcome to our first quarter earnings call. Thanks for joining us. A reminder that certain statements made on this call are forward-looking within the meaning of the 1995 Private Securities Litigation Reform Act. These statements are subject to risks and uncertainties and could cause actual results to differ from those suggested. Our earnings release was issued this morning. Please review it for more detail on those factors that could cause actual results to differ materially. This call is being recorded and will be made available later on our website. On the call today are, Chairman and CEO, John McConnell; President and COO, Mark Russell; and Executive Vice President and CFO, Andy Rose. John will get us started.

Well, Cathy, thank you and welcome to all of you who have joined us today. Obviously we are very pleased to not only announce a record first quarter today, but our best quarter in the company's history. Obviously we are very proud of our employees around the world for their efforts in helping produce these record results. Let's turn over to Andy Rose and Mark Russell to go a little deeper into the results this quarter.

Thank you John and good afternoon everyone. The company delivered record earnings per share of $1.03 excluding restructuring in the first quarter to start the fiscal year up $0.49 or 91% from the prior year. A strong performance from steel processing and the joint ventures, particularly ClarkDietrich, led the way offset by continued weakness in oil and gas, and agriculture. Several unique items in Q1 were as follows. Inventory holding gains during the quarter were estimated at $17 million or $0.17 per share as compared to a loss of $7 million or $0.07 per share in the prior year quarter. Restructuring charges of $1.3 million were spread across several businesses. Our effective annual tax rate is approximately 31%, but we benefited in the quarter from a $5.8 million favorable impact from two discrete items, the largest relates to the early adoption of a rule related to accounting for stock compensation. Cylinders' operating income, excluding restructuring, was down $3.3 million or 19% to $14.3 million, driven almost exclusively by declining sales in oil & gas equipment, down 56%. Pressure cylinders' operating margins for the quarter were once again below normal due to the impact of losses in oil and gas. We have reduced costs in an attempt to match demand in oil and gas with the goal of getting the business to EBITDA neutral. Unfortunately, solid operating margins in consumer products, industrial products and alt fuels are being masked by the underperformance of oil and gas. Fuel processing operating income was up $31.7 million, excluding restructuring, from the prior year quarter to $55.7 million. Increases in flat steel pricing during the first half of the calendar year had a significant impact in earnings and were also helped by some modest mark-to-market gains on unqualified steel hedge. Revenue in engineered cabs was…

Thank you, Andy. In steel processing, our direct shipment volume was essentially flat compared to last year's quarter. Total volume was down 6% if you exclude our WSP joint venture, which was unconsolidated last year. Metals Service Center Institute data for the same period shows direct industry shipments were are also flat compared to last year. Our mix was 62% direct to 38% toll compared to a 60-40 split last year, again excluding WSP. Construction was our strongest major market segment with shipments up 29% this year. Detroit 3 automotive shipments were flat, agriculture was down 6% and heavy truck was again our weakest segment, falling 23%. Our tailor welded blank joint venture started regular shipments of lightweight friction stir welded aluminum blanks in the quarter. We also received first orders for our new hot wire process, which efficiently welds steel blanks for lightweight hot stamping applications. Direct shipment volume at our Serviacero joint venture in Mexico was down 3% compared to last year. But total volume was up 3% there. In steel processing, cold rolling and annealing joint venture facility in China is now complete. I am looking forward to joining our partners there in a few weeks to help celebrate the official opening of this world-class facility. In our pressure cylinders business, our oil & gas equipment revenue was down 56% compared to last year. The market remains challenged and customer drilling and completion budgets are limited. We are continuing to drive our cost structure in this business toward EBITDA neutral in preparation for an eventual market upturn. Our industrial products groups saw our revenue down 14% in the quarter on weak demand across our refillable propane cylinder product lines as well as a soft market for our high-pressure industrial cylinders in Europe. However, margins improved compared to…

Well, thank you both. We will do our best to answer any questions you have now.

[Operator Instructions]. And our first question is from Seth Rosenfeld with Jefferies. Please go ahead.

Good afternoon. Thanks for your time today and congrats of the solid results. Two questions from my side. First, looking at your steel processing business, you commented in the release in your earlier comments on the benefits of holding gains over the course of the period. I was wondering if you can try to quantify for us what extent do you benefited over the last three months and how much of that you think could be repeatable looking forward in the current pricing environment? Also, outside of steel processing, just wondering, which other segments were JVs do you think benefited there? And then separately, looking at your automotive business, I was wondering if you could speak a bit more broadly about where you see demand in the U.S. automotive sector? And about any of your longer lead time orders, what sort of commentary you are hearing from OEMs in the current environment? Thanks very much

Well, this is John. On the last question, automotive demand is strong. Where it goes from here really depends on interest rates, gasoline prices and a number of other things. So our outlook is fairly steady at this point. For me, it was hard to, you were breaking up a little bit on the first question, I don't know if Mark or Andy heard enough to give an answer.

Yes, I think, if I heard you correctly, Seth, on the inventory holding gains, our estimate is $17 million for the quarter. We are probably through most of that. I would say the second part of your question on JVs, ClarkDietrich did benefit from what for them was essentially declining raw material prices in a rising price environment. So their spreads were higher during the quarter.

The $17 million, is that just for the steel processing business or does that include any of the gains seen in ClarkDietrich?

Yes. That's just for the steel processing business, correct. It does not include any of the joint ventures.

Okay. Thank you. And just one last follow-up question. If you can speak a little bit about some of your rerolling operations and coding operations? Can you speak about how you are seeing the current spread environment in the U.S. for cold-rolled and galved versus hot-rolled coil? At first, to what extent you think you benefited in the last quarter from that spread environment? And then on how sustainable you think that could be looking forward?

So the spread is very attractive right now, as I am sure you are aware. We have two coding businesses, Delta and Spartan. Spartan is primarily a toll operation, so they don't benefit significantly, although there's some opportunity there. Delta is more direct business, but a lot of it is contract business. And so the spreads are determined when we do our contracts at the beginning of typically around the beginning of the calendar year. And so they are benefiting on the spot portion of their business, which is maybe 20% or 25% of their volume. And then there would be an opportunity obviously as we go through the contracting season this year to improve on the contract business.

The underlying demand is very strong, Seth.

Great. Thank you very much.

[Operator Instructions]. We will go to the line of Amanda Adami with Macquarie. Please go ahead.

Hi. I am on behalf of Aldo Mazzaferro today, but congrats on a great quarter. And I just have a quick question about, going back to the inventory gains and the spreads, relative to our estimates, it looks like the inventory gain didn't seem to show up on the operating income line for steel and I am just curious why, it looks like you beat on the spread, but not necessarily on the operating income relative to our estimates. Where was the give back there? And if you could maybe talk to where you see that going forward?

Yes. I am not specifically familiar with your estimates. So I would have to do that offline. I apologize.

Okay. No worries.

And we will go to John Tumazos with John Tumazos Very Independent Research. Please go ahead.

Congratulations. Could you give us a little color on WAVE, where there was a small decline? Were there some overseas markets or currency translation impacts? And could you give us some color on November quarter cash flow outlook? You had a big favorable lengthening in payables, you had some cash benefits from receivables, inventories rose, there were a lot of moving parts in free cash flow.

Yes. I get the easy part of that question, which is the first one, John, on WAVE. They had a little bit of buy ahead in our fourth quarter. So think May time frame. And so what happens is obviously when they get that buy ahead then in June and July, their business is going to be a little softer. So that really explains the impact that you are seeing there. The other piece on payables and receivables is going to be more complicated to understand. I would have to go back and take a look at that. Now one thing you did mention, in the past year, we have had some changes in terms with some of our larger suppliers, which has helped with working capital, but we believe that's more of a permanent change.

Thank you.

And to the presenters, there are no further questions coming in.

Okay. Thank you all for joining us today. And again, congratulations and a big thank you to all of our employees for producing the best quarter in the history of Worthington Industries. Thank you. Goodbye.

Ladies and gentlemen, this conference is available for replay that starts today at 4:30 P.M. Eastern, will last until October 5 at midnight. You may access the replay at any time by dialing 800 475-6701 or 320 365-3844. The access code is 401556. Those numbers again, 800 475-6701 or 320 365-3844. The access code is 401556. That does conclude your conference for today. Thank you for your participation. You may now disconnect.