Ladies and gentlemen, thank you for standing by, and welcome to the Ternium Third Quarter 2022 Earnings Call. [Operator Instructions] Thank you. Sebastian Marti, you may begin your conference.

Good morning. Thank you for joining us today. My name is Sebastian Marti, and I am Ternium's Global Investor Relations and Compliance Senior Director. Ternium released today its financial results for the third quarter and first nine months of 2022. This call is complementary to that presentation. Joining me today are Ternium's Chief Executive Officer, Maximo Vedoya; and the company's Chief Financial Office0072, Pablo Brizzio, who will discuss Ternium's business environment and performance. At the conclusion of our prepared remarks, there will be a Q&A session. Before we begin, I would like to remind you that this conference call contains forward-looking information and that actual results may vary from those expressed or implied. Factors that could affect results are contained in our filings with the Securities and Exchange Commission and on Page two in today's webcast presentation. You will also find any reference to non-IFRS financial measures reconciled to the most directly comparable IFRS measures in the press release issued this morning. With that, I'll turn the call over to Mr. Vedoya.

Thank you, Sebastian. Good morning, and thank you all for participating in our conference call today. Ternium reported a good set of results for the third quarter with adjusted EBITDA of $679 million on a margin of more than $200 per ton. This is equivalent to adjusted EBITDA margin of 16% of sales, a level that is within Ternium's historical margin range. On top of this, we had a very strong cash generation in the quarter. Cash from operations was more than $1 billion, aided by a significant working capital release. Last year, we transitioned from an annual payment schedule to a twice [indiscernible] payment with an advance in November and a final payment in May. I believe this change in our dividend payment schedule was a positive development that underscores our long-term commitment to the return to our shareholders. In this line, Ternium's Board of Directors announced today an interim dividend payment of $0.90 per ADS, equivalent to $177 million that will be paid on November 17. This represents an increase of $0.10 per ADS compared to last year interim dividend payment. Looking ahead, we are facing a complex global economic situation with uncertainty driven by policy and geopolitics like monetary tightening, the war in Ukraine and China's economic slowdown. Rise in interest rates, combined with high inflation, are undermining economic confidence and slowing down investment as well as household spending. Focusing on the U.S., according to the World Steel Association short-term outlook that was just released, steel demand is not expected to get into negative territory despite a softening economy. Construction activity in the private sector will decrease due to a downturn in the housing market. But balancing this, the non-residential sector is still strong and an increase in infrastructure investments due to the infrastructure law and rising…

Thanks, Maximo, and good morning to everybody, and thank you again for your participation today. Let's move to the webcast presentation to Page 3. And you will see that over the last few quarters, we have been our transition to a more sustainable level of profitability, as we have already expected. Adjusted EBITDA in the third quarter was firm $679 million and a margin of $229 per ton or 16%. The sequential decrease in adjusted EBITDA in the third quarter was mainly the result of lower fuel prices and higher cost of sales. As we anticipated in last quarter's call, EBITDA margin in the fourth quarter will continue to decline, reaching a level below the company's typical range before reversing this trend in the first quarter of 2023. As a restart of the first-in-first-out accounting, our financials in the fourth quarter will have a temporary mismatch between prices and cost, in a way reflecting a price level of one point in time with costs that happened way more in the past. In the fourth quarter, steel prices under quarterly contracts in Mexico will reset at lower levels than they did in the third quarter, but cost per ton will not account -- will not go with that decrease. So it will continue to reflect the gradual flow through the company's inventories of relatively high-cost raw material, which were purchased during the first half of the year when Russia invasion of Ukraine disrupted steel markets. Raw material purchased more recently on lower price will be reflected in our cost per ton from the first quarter of 2023 and on. Net income in the third quarter fell to $220 million, equivalent to earnings per ADS of $0.78. This includes a $0.57 per ADS loss related to a write-down of Ternium's investment in…

[Operator Instructions] Your first question comes from Caio Greiner with BTG Pactual. Your line is open.

Hello, good morning, everyone. Two questions here. So the first one on your working capital release. So in 2021, you guys had $2.6 billion in working capital investment, that's from your presentation. And so far, you only reversed to a small part of that. And so my question is, are you guys expected to continue posting positive contributions from working capital in the next quarters? I mean, should we expect a full reversion of those $2.6 billion ahead or did something change that might lead you guys to claim only a part of that or even ahead of that going forward? And my second question here on capital allocation. So I know that's pretty much the same question we have been asking for a while. But the truth is that free cash flow generation continues to be very robust, maybe even more than expected a while ago, and you guys continue to pile up cash, I mean, $1.8 billion already in net cash. So my question is, what can you guys do in the short-term? I mean, even with the projects that you guys have already announced, that you guys are expected to announce going forward, I mean, the CapEx outflow is only -- is supposed to take a few years. It's only -- it's going to outflow in quite some time. And you guys could be -- and you guys going forward, I mean, can you even finance that with free cash flow generation even if the first part of my question is true with working capital being reversed? So if that happens, free cash flow generation is still going to continue to be strong, it's still going to continue to be robust. So I mean, despite dividends rising, it won't materially change that. So the question is, what can you guys do in the short-term in order to deal with that amount of net cash that you guys have been piling up? I mean, can you guys announce a buyback, I mean, extraordinary dividend? I know you guys have mentioned in the past that it's not really an option that the board is favorable of, maybe an M&A that you guys have been analyzing? So what can you guys do regarding that? Thank you very much.

Thank you very much. I would let Pablo answer the first question and then I'll try to answer the second one. Pablo/ A – Pablo Brizzio: You are very right. We have generated, because of the significant increase in prices of different raw materials, a significant level on working capital that we have started to reduce. As you mentioned, it's not the full amount that we have already reduced, but as I mentioned in our initial remarks, we are expecting to continue to do that during the fourth quarter and also into 2023. So you are completely right. Will we continue reducing working capital? Of course, this will depend on the prices of the different products and raw materials that we purchase. But it's -- at least a significant portion of the build-up of working capital we have in the past will be recovered.

Thank you, Pablo. The second about capital allocation, Caio. It's true. We have a very strong financial position, that's true. But to be honest, given the uncertainty, I think the world is coming or it's going to. We feel a little bit comfortable having this strong position. Nevertheless, as you know, we have a very important investment to be made, mainly in Mexico with all the investments we already announced. And the ones that haven't been announced, but we have been very clear that we are committed to expand our steel shop capabilities to be USMCA compliant by 2027. So that's a huge investment we are making. And we are, I mean, giving a high yield of dividend, as you can see because of this interim dividend we are having. Buyback is not on the table, to be honest, as we have discussed in the past. So I think that -- and M&A, I never said no. We analyze, and you know that we analyze different opportunities, but we don't have anything to inform today. So there are things that are in the table and we are going to look for opportunities. But again, given the uncertainty that we are expecting the world to have, I think it's good to be in this position. We are very comfortable in this position, giving a huge amount of dividend, because if you calculate the dividend yield, well, we cannot until February, but it's going to be very high.

Okay. Thank you very much.

You are welcome, Maximo.

Your next question comes from Jon Brandt with HSBC. Your line is open.

Hi. Good morning, gentlemen. Thanks for taking my questions. Maximo, I first wanted to ask you about steel prices in 2023 and sort of what your view is there. Obviously, there's concern about the global economy and how much slowdown we'll see; higher interest rates, higher inflation, zero COVID in China and things like that. So I guess, what are your expectations for steel prices, particularly in the U.S. and Mexico as we head into 2023? Do you think we'll potentially see some more downside to current spot prices? And then my second question just relates to the cost pressures that you're seeing, I understand they're temporary. But could you just give us a little bit more detail? Is it mostly the slabs that you're buying and iron ore prices or iron ore costs that are -- that had the impact on the margins this quarter? And if -- I don't know if there's a way to quantify it, but if you sort of take away the timing differences, if you look at sort of where spot slab is and spot iron ore, is there a way to quantify what your margins would have been if there wasn't this sort of timing impact? Thank you.

Thank you very much. I'll ask Pablo to start with the second one, because I think it's much shorter. And then I will try to make a summary of the first one because it's very broad, the prices issue, I think.

You're right. When you were making your question that, clearly, what we have is a mismatch between the price of our product and the timing of reflecting the cost of our product in our financial statements. The big issue here is that when you have a trend of prices going down, you will see what we are reflecting, which is a reduction in the margins. At the moment, you have the other -- the prices move the other way around, meaning prices going up, you will have higher margin than expected. But to answer clearly your question, and it's something that we tried to pass the message during the opening remarks, both Maximo and myself, is that what we are reflecting today in our cost is the prices of slabs and iron ore and coal that we saw basically in the second quarter of this year or even in the first quarter of this year, where you saw prices of slabs reaching levels of, in some cases, $1,000 per ton or prices of coal that reached $600 per ton. You are seeing that these prices today are way below this level. And also, I don't know, prices are way below the prices that we saw in recent quarters. So that's why we are very comfortable to say -- I'm trying to go to a specific number. But even though that next quarter we will be showing a level of course much higher than the real one or the replacing costs of these raw materials. We are expecting to go back to normalized level entering into next year. So that's why we said that we will probably go in the fourth quarter to a margin below the normal range of Ternium and we will return to at least to that level entering into first year -- into the first part of the year. So the is where this mismatch is coming from. So the second semester of this year, both the third quarter and the fourth will be having this negative impact and then this should be over entering into the first half of the year. So that's why for us, the number for Ternium continues to be relatively good. If you take on average what we are presenting for 2022, you will see that the EBITDA that we're generating is pretty solid, clearly, because of the price levels we are expecting to see or reflect exactly the same, but we should be reflecting a decent and a good level of profitability entering into 2023.

I'll try to be short also, although I don't know if I'm going to be able. Price in 2023, clearly -- I mean, it's clear that steel prices in the North American region continued to decrease, reaching somehow a level of prices that were below our expectations. I still think that the base price or the normal price -- the normalized price is going to be higher, as I said in several conference calls, of course, between the range between $800, $900, even $1,000, that this is a new range of steel prices going forward. But in the short-term, clearly, what is happening in the world is affecting the steel price in North America. How much, is something that we have to still analyze. I think there are good news or there are some bad news, but there is a lot of good news. Clearly, I mean, prices are going to be a reflection of what will happen in the economy in the next quarters. I think that some of the economies in the world are going to get troubled, no doubt. Europe is going to be much more harder impact than the Americas. The slowdown in China, it doesn't seem that it's going to end in the very, very short range. But I am confident that the recession in the Americas, as I said, is not going to be as hard, if there is a recession, as in other parts of the world. But clearly, prices in the short-term are going to be a reflection of how bad or how long or how hard this recession is. Again, our expectation is that it's not going to be as hard as in some other parts. The good news is that we are really seeing a change in the dynamics of…

Its not an easy question. I do appreciate. Thank you.

Your next question comes from Carlos De Alba with Morgan Stanley. Your line is open.

Yeah, Thank you. Good morning. So coming 0back to the CapEx and the cash flow generation, can we talk about maybe the timing - the potential timing of an announcement for the new electrical furnace in North America? And whether or not this might negatively impact the dividend per ADS or per share that the company pays in the coming years?

Thank you, Carlos. The second part, no, is the answer, clearly, no. I mean, it's a huge investment, but I think Ternium is more than capable of doing. The first part of the question is the timing. I mean, we have been discussing this and we are working very hard on this in the engineering process. To be honest, this -- I mean, we have to have the facility running by 2027. That's the deadline of the new USMCA rule of origins. So we have time. And this uncertainty of the economy of the world, to be honest, it's giving us some time to think even how to -- what is the best technology to use, and that's the discussion we are having, and how we can be more competitive in both sense, competitive in the production cost and in the CapEx. So we are in that process. We don't have exact timing, but it should be soon.

All right. Thank you. And my second question is related to the risk of potential imports into the Mexican market mostly from North America, from the U.S., but mostly from other places. The situation in Europe on the demand side is complicated. And yeah, they are shutting down capacity as well. But prices are low, demand is weak and prices in Asia are also quite low. So how do you see the risk of imports into the Mexican market?

The risk is always there. I think if you see the -- especially in flat products, which is where we can grow, we can -- we are at full capacity in long products. So speaking of flat products, if you see the last 12 months, there has been a steady decline in the amount of imports coming to Mexico. Last month was September, the information -- the last information in September, I think that is going to continue. Why, because we are very eager to get that market share. We said that when we put our hot strip mill running. So I think that we are gaining more contracts and we are going through that input. There is a risk, yes. I don't think there is a risk of a continuous export from European or Asian countries. There is a risk of spot export, yes. But to be honest, today, North America is very competitive in steel. So I don't think they have the competitiveness going forward in the long run. Some spot operation, probably at a substantial low level. The other thing is to remember that in Mexico and in the U.S., in the U.S. you have the 232, which is very good. In Mexico, you also have a kind of 232. So there is some kind of level of -- it's not protection, because it's not protection, but helping when these countries make the dumping of steel to the North American region. So that's a second part that make it a little bit more difficult. The third, you asked about the U.S., probably, yes, our bigger competitor today is the U.S. Again, we think having the flexibility we have in our facilities and our cost structure that we are able to compete with them very good. So I think imports are going to continue, but the trend of the last 12 months is a trend that is going to continue in Mexico.

Thank you very much.

Your are welcome.

Your next question comes from Thiago Lofiego with Bradesco. Your line is open.

Thank you. Good morning, gentlemen. Maximo, actually one question on my side, on the demand side in Mexico. So you mentioned construction activity in Mexico is low. Can you give us more color on what you're seeing, maybe breaking it down by properties, residential, commercial, infrastructure? So if you could give us more color that would be very helpful/

Yes, Thiago, for sure. I mean, construction in the residential market is the one that is down in Mexico. And it's not happening in the same timing as in the U.S. I think in the U.S., residential housing is also starting to decline, but this is very recently. In Mexico, it has been for quite some time already this going down for residential. Because of that, some of the industries that sells also to the residential market, I'm talking about home appliances, for example, and that sells to both to Mexico and the U.S. export material to the U.S., those industries are not performing very well. On the other hand, there is industries that are performing better. Construction in the non-residential is very high. As I told you, our example of our metal building facility, which again, is very small. So it doesn't make the numbers in Ternium. But that's huge to have more than two years of quotation in non-residential construction, it's never happened. There is no good statistic also in Mexico where you can say how many construction, non-residential construction are there. But if you take a survey that makes GLL, it's a broker, an American broker, they made a survey about how many million meter squares are constructed of industrial infrastructure. I mean, it is continued growing. This quarter, the first semester of '22, they constructed the same amount as all the amount that was constructed last year in the first semester. And the occupation rate of this industrial -- a lot of these warehouses are rented. That usually works about 6%, 7%, today it's almost 3%. So there is a huge investment in these industrial parks, let's put it that way, Thiago. That is -- it's kind of balancing the other one. And another thing that is balancing is other industries. Automotive industry, again, is not perfect, is not high enough as we thought it would be. They are still having some problems in the supply chain with some stoppage of different plants, but the demand they have is still very big. I mean, you cannot get a new car in Mexico. I think in the U.S., inventories are also very low. So I think that they are going to continue trying to increase a little bit capacity. And other companies, especially companies that works in equipment are also very high in demand. So it's a balance. I hope I answered the question, Thiago.

Yeah, you did, Maximo. Just a very quick follow-up. So on the auto sector. So is this more of an expectation that things will normalize and then auto production will ramp up or you're already seeing that? Because I get the demand side of the equation, which is definitely there is -- there is demand there, but is there enough production already happening or do you think this is more coming in - in the coming months?

Let me answer with my thoughts - well, at least what is happening in Mexico. I think most of the automakers have in their plants to produce much more. And then there are searches of some kinds of semiconductors or other pieces that don't allow them to produce at the pace they want to produce. That is happening. I mean, from what we heard from them, it is easing, but it's not easing at the pace we thought it was going to be easing, these restrictions. So I cannot tell you a straight answer saying they're going to produce 10% more or 15% more. They're going to produce the same or more, for sure, but how much is that, we don't have exactly the number because it changed very rapidly. I mean, the stoppage are announced for one week for the other one. So that's what is happening.

And very last one. So balancing everything out here in terms of the steel demand in Mexico, your best guess is for flattish volumes for next year. Is that right? Just confirming that.

Yeah, it's an increase. Again, if you see the short grained outlook, I think it was an increase of 2% or 3% of the demand in Mexico, which I think is correct to think that way.

So actually a small increase?

No, it's not a big increase. Again, this is a balance, and it depends a lot -- I mean, we are being conservative saying that there is going to be a recession. That's our base case scenario in world steel. And so we are being conservative. Nevertheless, it is an increase in consumption -- in steel consumption.

Your next question comes from Alfonso Salazar with Scotiabank

The question that I have is regarding global steel trade. What are your expectations, and not only for 2023, but in the long-term? And the question is regarding the problem of over-capacity and the fact that there is more capacity being built in North America. There could be excess capacity in China because of all the challenges that the country is facing. So just trying to understand or want to hear your thoughts about what's going to happen four, five years from now against the backdrop of lower demand in China, increased demand in the U.S. With the big difference in prices globally, do you expect more protectionism coming later in the decade? And also to what extent USMCA protection warrants the investments that you are making in Mexico?

Alfonso, it's a very good question, and I'll try to make the best effort to answer it. I think that global steel trade is growing at a trend that is going to decrease in the future, and we are seeing all this. I mean, today, there is more regionalization or whatever you want to call it. And I think that it's very clear that the Atlantic or whatever you want to call, the Atlantic Alliance is moving one way and China is moving another one. So of course, there's over-capacity in China. Of course, that over-capacity has to be dealt with. And we have been working or we have been very advocate that China has to work for that over-capacity. But I think that, as I said before, nearshoring is something that is happening. And so that demand, that steel consumption is going to come to the region. North America first, but there are also other parts, Brazil, for example, that will probably be benefit for this trend also. So I think that in a sense, our operations, which are -- I mean, we are very well balanced or very well positioned in where we are producing steel because I think other places who are going to be benefit for this trend that is something that is going to happen and it will continue for the next several years. I am not concerned about over-capacity in the U.S. I think, yes, there are new plants being built. They are going to compete with us. But to be honest, there's a lot of inputs in the U.S., more than 25 million tons. And second, I mean, there are also, I mean, some old facilities that in some time in the next five years, some of them has to be shut down, they're not very competitive. So I'm not worried about that. And I think this trend is helping us as Ternium of where we are positioned for the next five years. I hope I answered the question with that, Alfonso

Yeah, that’s very helpful. Thank you.

Your next question comes from the line of Timna Tanners with Wolf Research. Your line is open.

Good morning, Maximo, Pablo. A couple of questions. One is, I know you just mentioned flat volumes in Mexico. But regarding Ternium's volumes, I wanted to get a little bit more color thinking ahead about both the mix and your ability to ramp up further. Obviously, you have spare capacity we've talked about in the past. But with the qualification process that you're going through or said you were going through ahead, like how do we think about the mix improving? And how do we think about potentially taking more share from import in light of AMSA ramping up and in light of just the competitive nature of the broader market?

Let me try to answer that, Timna, because it's a good question. I think -- I mean, as I said, market in Mexico, there are some good and some bad news. So the market, as the World Steel put it in the SRO, is not going to grow a lot, but we are confident that we are going to grow more volume in the flat products. The ramp-up of hot strip mill in Pesqueria is doing very well. On October, it made 317,000 tons, which was a record. I know that we have the Churubusco mill running at lower capacity, but we have that to increase capacity as we are citing this input. The imports in Mexico of flat products are around 450,000 tons a month. So there's a lot of imports in Mexico. But of course, most of those imports are industrial customers. So that's that mix. And all -- most of those industrial customers needs to go through a certification process that takes time. And so we are seeing now new contracts that we are winning for 2023. We are discussing new contracts of products that we weren't able to do. Regarding the other producers in Mexico, I think the two of them are in a different situation. So -- and I don't want to talk a lot about competitors, but some -- one of those are increasing production and the other one is in the other side. So we don't see a lot of change there.

So then the other questions I had, one is regarding how to think about EBITDA per ton and margins going forward. So clearly, Q3 hit by higher costs as prices fall. But even as costs fall, you should see more prices declining on a lag into the first quarter from the way that you price your product on a lag on quarterly contracts. So is this a good run rate margin do you think given that both prices and costs still have to decline into the next several quarters or how do you think about the recent run rate relative to how -- obviously, out earning perhaps a bit last year, maybe is this a good run rate or do you think that there's potential to see margin improvement from third quarter?

Timna, this is Pablo. Let me take this question. Clearly, what you saw during the third quarter, which is margin of 16%, is something that we are expecting to see a reduction over that in the fourth quarter because of the reason, which I explained. Your question is going more to a more sustainable level of margins, that is, what we are expecting to see in the coming quarters starting next year, starting the first quarter and moving to the second quarter to stabilize at the new level of prices. Taking into consideration the picture Maximo depicted on the view of prices, I will follow, of course, on that view. And if that's the case and with the reduction in the level of cost that we will be seeing entering into the first and second quarter with significant reduction in the input cost, we are expecting to return to normalized level of EBITDA margins entering into and after these two quarters of the year, we should be there and sustain that level. When I mean in historical levels, I mean between 15% to 20% of EBITDA margin. We were adjusting the low part of this range during the third quarter. We will not be there during the fourth quarter. And we will start recovering that level entering into the first quarter and moving into the second quarter and then sustain that during the rest of the year. Of course, this will be subject to changes in the market, but this is the view that we have. This is the goal that we have. This will be helped by all the things that Maximo also mentioned, which is the new customers of new products and the substitution of imports. So that's our work in a scenario, and that's what we are seeing.

And then the last one for me, if I could, was just on -- in the past, you've talked about some thoughts on CapEx heading into 2023, in particular, $1 billion investment in finishing lines. So I was just trying to get a sense of how much we might expect to see that increase year-over-year? And if those projects are still on track?

Yes, we are still expecting $1 billion in 2023, probably 2024 is going to be a little bit higher than that with all the things that we have been discussing.

Thanks again.

Thank you, Timna. You are welcome.

There are no further questions. I'd like to turn the call back to CEO, Maximo Vedoya for closing remarks.

Thank you very much all for your participation today. As always, please contact us for any suggestion or additional questions. Have a very good day.

This concludes today's conference call. You may now disconnect.